公园急救电路-Park-Aid
公园急救电路-park-aid
parts:
r1_____________10k 1/4w resistor
r2,r5,r6,r9_____1k 1/4w resistors
r3_____________33r 1/4w resistor
r4,r11__________1m 1/4w resistors
r7______________4k7 1/4w resistor
r8______________1k5 1/4w resistor
r10,r12-r14_____1k 1/4w resistors
c1,c4___________1΅f 63v electrolytic or polyester capacitors
c2_____________47pf 63v ceramic capacitor
c3,c5_________100΅f 25v electrolytic capacitors
d1_____________infra-red led
d2_____________infra-red photo diode (see notes)
d3,d4________1n4148 75v 150ma diodes
d5-7___________leds (any color and size)
ic1_____________555 timer ic
ic2___________lm324 low power quad op-amp
ic3____________7812 12v 1a positive voltage regulator ic
device purpose:
this circuit was designed as an aid in parking the car near the garage wall when backing up. led d7 illuminates when bumper-wall distance is about 20 cm., d7+d6 illuminate at about 10 cm. and d7+d6+d5 at about 6 cm. in this manner you are alerted when approaching too close to the wall.
all distances mentioned before can vary, depending on infra-red transmitting and receiving leds used and are mostly affected by the color of the reflecting surface. black surfaces lower greatly the device's sensitivity.
obviously, you can use this circuit in other applications like liquids level detection, proximity devices etc.
circuit operation:
ic1 forms an oscillator driving the infra-red led by means of 0.8msec. pulses at 120hz frequency and about 300ma peak current. d1 & d2 are placed facing the car on the same line, a couple of centimeters apart, on a short breadboard strip fastened to the wall. d2 picks-up the infra-red beam generated by d1 and reflected by the surface placed in front of it. the signal is amplified by ic2a and peak detected by d4 & c4. diode d3, with r5 & r6, compensate for the forward diode drop of d4. a dc voltage proportional to the distance of the reflecting object and d1 & d2 feeds the inverting inputs of three voltage comparators. these comparators switch on and off the leds, referring to voltages at their non-inverting inputs set by the voltage divider resistor chain r7-r10.
notes:
power supply must be regulated (hence the use of ic3) for precise reference voltages. the circuit can be fed by a commercial wall plug-in power supply, having a dc output voltage in the range 12-24v.
current drawing: leds off 40ma; all leds on 60ma @ 12v dc supply.
the infra-red photo diode d2, should be of the type incorporating an optical sunlight filter: these components appear in black plastic cases. some of them resemble to92 transistors: in this case, please note that the sensitive surface is the curved, not the flat one.
avoid sun or artificial light hitting directly d1 & d2.
if your car has black bumpers, you can line-up the infra-red diodes with the (mostly white) license or number plate.
it's wiser to place all the circuitry near the infra-red leds in a small box. the 3 signaling leds can be placed far from the main box at an height making them well visible by the car driver.
the best setup is obtained bringing d2 nearer to d1 (without a reflecting object) until d5 illuminates; then moving it a bit until d5 is clearly off. usually d1-d2 optimum distance lies in the range 1.5-3 cm.
if you are needing a simpler circuit of this kind driving a led or a relay, click infra-red level detector
2012年半导体设备资本支出将下降19.5%
汽车、消费、医疗商机看涨 ADI争当MEMS先锋
长春采用华为设备部署开通全国首个A+P电联200M共建共享试点
3D打印毛囊突破性进展!“头发工厂”将成秃顶的救星
单芯片直接数字频率合成与模拟PLL的比较
公园急救电路-Park-Aid
KLA发布全新汽车产品组合以提高芯片良率及可靠性
COVID－19大流行对存储器市场造成了哪些大的影响
影响LiFePO4电池寿命的因素，如何延长LiFePO4电池寿命
苹果成为全球第一家市值达1万亿美元的科技公司
华芯通关闭背后,高通在 ARM服务器市场的困境
DRAM内存没有增产将导致内存、闪存今年集体涨价
Tektronix AWG610任意波形发生器AWG510/AWG710
Vivo X60和X60 Pro对每种用户而言都足够强大?
人们的交流方式会被未来的AR技术将改变吗？
中巨芯科创板IPO提交注册！SK海力士为第一大客户，募资15亿扩产
常用电源自动切换电路原理图讲解
河套IT TALK 62：（原创）由浅入深说高清——聊聊高动态范围（HDR）
2018第三季度全球智能手机出货量排行
工业etherCat转RS232网关在物流行业的应用方式
parts:
r1_____________10k 1/4w resistor
r2,r5,r6,r9_____1k 1/4w resistors
r3_____________33r 1/4w resistor
r4,r11__________1m 1/4w resistors
r7______________4k7 1/4w resistor
r8______________1k5 1/4w resistor
r10,r12-r14_____1k 1/4w resistors
c1,c4___________1΅f 63v electrolytic or polyester capacitors
c2_____________47pf 63v ceramic capacitor
c3,c5_________100΅f 25v electrolytic capacitors
d1_____________infra-red led
d2_____________infra-red photo diode (see notes)
d3,d4________1n4148 75v 150ma diodes
d5-7___________leds (any color and size)
ic1_____________555 timer ic
ic2___________lm324 low power quad op-amp
ic3____________7812 12v 1a positive voltage regulator ic
device purpose:
this circuit was designed as an aid in parking the car near the garage wall when backing up. led d7 illuminates when bumper-wall distance is about 20 cm., d7+d6 illuminate at about 10 cm. and d7+d6+d5 at about 6 cm. in this manner you are alerted when approaching too close to the wall.
all distances mentioned before can vary, depending on infra-red transmitting and receiving leds used and are mostly affected by the color of the reflecting surface. black surfaces lower greatly the device's sensitivity.
obviously, you can use this circuit in other applications like liquids level detection, proximity devices etc.
circuit operation:
ic1 forms an oscillator driving the infra-red led by means of 0.8msec. pulses at 120hz frequency and about 300ma peak current. d1 & d2 are placed facing the car on the same line, a couple of centimeters apart, on a short breadboard strip fastened to the wall. d2 picks-up the infra-red beam generated by d1 and reflected by the surface placed in front of it. the signal is amplified by ic2a and peak detected by d4 & c4. diode d3, with r5 & r6, compensate for the forward diode drop of d4. a dc voltage proportional to the distance of the reflecting object and d1 & d2 feeds the inverting inputs of three voltage comparators. these comparators switch on and off the leds, referring to voltages at their non-inverting inputs set by the voltage divider resistor chain r7-r10.
notes:
power supply must be regulated (hence the use of ic3) for precise reference voltages. the circuit can be fed by a commercial wall plug-in power supply, having a dc output voltage in the range 12-24v.
current drawing: leds off 40ma; all leds on 60ma @ 12v dc supply.
the infra-red photo diode d2, should be of the type incorporating an optical sunlight filter: these components appear in black plastic cases. some of them resemble to92 transistors: in this case, please note that the sensitive surface is the curved, not the flat one.
avoid sun or artificial light hitting directly d1 & d2.
if your car has black bumpers, you can line-up the infra-red diodes with the (mostly white) license or number plate.
it's wiser to place all the circuitry near the infra-red leds in a small box. the 3 signaling leds can be placed far from the main box at an height making them well visible by the car driver.
the best setup is obtained bringing d2 nearer to d1 (without a reflecting object) until d5 illuminates; then moving it a bit until d5 is clearly off. usually d1-d2 optimum distance lies in the range 1.5-3 cm.
if you are needing a simpler circuit of this kind driving a led or a relay, click infra-red level detector
2012年半导体设备资本支出将下降19.5%
汽车、消费、医疗商机看涨 ADI争当MEMS先锋
长春采用华为设备部署开通全国首个A+P电联200M共建共享试点
3D打印毛囊突破性进展!“头发工厂”将成秃顶的救星
单芯片直接数字频率合成与模拟PLL的比较
公园急救电路-Park-Aid
KLA发布全新汽车产品组合以提高芯片良率及可靠性
COVID－19大流行对存储器市场造成了哪些大的影响
影响LiFePO4电池寿命的因素，如何延长LiFePO4电池寿命
苹果成为全球第一家市值达1万亿美元的科技公司
华芯通关闭背后,高通在 ARM服务器市场的困境
DRAM内存没有增产将导致内存、闪存今年集体涨价
Tektronix AWG610任意波形发生器AWG510/AWG710
Vivo X60和X60 Pro对每种用户而言都足够强大?
人们的交流方式会被未来的AR技术将改变吗？
中巨芯科创板IPO提交注册！SK海力士为第一大客户，募资15亿扩产
常用电源自动切换电路原理图讲解
河套IT TALK 62：（原创）由浅入深说高清——聊聊高动态范围（HDR）
2018第三季度全球智能手机出货量排行
工业etherCat转RS232网关在物流行业的应用方式