3节镍氢电池充电电路图
3节镍氢电池充电电路图
figure 1 contains the recommended schematic for charging a 3-cell nimh battery pack. refer to application note 201 for the values of all the components shown in the schematic. in addition to following this schematic, there are some other things to consider when completing the application design.
the charge source for the application should be a constant current or current limited supply with an opencircuit voltage between 5v and 12v. the current supplied by the charge source must be large enough to sufficiently heat the battery pack when a full charge is reached, otherwise, the cells heat too slowly to trip the dt/dt primary charge termination limit. consequently, charge termination is always reliant on a
secondary criteria such as exceeding a maximum temperature or a maximum charge time.in order to assure charging will terminate as a result of dt/dt primary termination limit, the ds2770 should be placed close to the battery cells with good thermal contact. it may be necessary to include thermally conductive putty between the cells and the ds2770 to enable efficient heat transfer.
additionally, enclosing the cells and the ds2770 in a casing allows the heat generated by the cells as they charge to be transferred to the ds2770 before it is lost to the ambient conditions.
X射线检查技术在PCB组装中起着什么样的作用
Fairchild 为小型企业提供焕然一新的设计支持平台
28KHZ-40KHZ自动追频超声波电路板线路
点云标注在自动驾驶中的实时性要求
说一说半导体微型互联世界里的大变化
3节镍氢电池充电电路图
从2013年以来至今，全球约有40万名科学家在这些假期刊上发表论文
ZLG致远电子E6000率先支持新国标 电压暂降和短时中断的定义
【内含PDF】如何研发性能优异的储氢材料？高压储氢吸附仪在储氢材料中的应用
crc校验原理_怎样修复crc校验错误
Micro LED显示不断推陈出新 但还有很多问题丞待解决
日立推出全新自动盖章机器人 各方面都引起了强烈的争议
深度解读，如何根据ISO26262开发安全要求
华为禁令持续 美日芯片厂现况惨不忍睹
黄曲霉毒素检测的产品性能
无人机 | 系统如何实现自主性
华为mate 40 Pro怎么升级鸿蒙系统
安森美半导体携手3M改进车辆和道路基础设施之间的通信
新一代iPhone 8回归精美玻璃背板，销量低于预期，库克是失败了吗？
航空工业研发出的新一代支线涡浆客机新舟700项目已通过专家评审
figure 1 contains the recommended schematic for charging a 3-cell nimh battery pack. refer to application note 201 for the values of all the components shown in the schematic. in addition to following this schematic, there are some other things to consider when completing the application design.
the charge source for the application should be a constant current or current limited supply with an opencircuit voltage between 5v and 12v. the current supplied by the charge source must be large enough to sufficiently heat the battery pack when a full charge is reached, otherwise, the cells heat too slowly to trip the dt/dt primary charge termination limit. consequently, charge termination is always reliant on a
secondary criteria such as exceeding a maximum temperature or a maximum charge time.in order to assure charging will terminate as a result of dt/dt primary termination limit, the ds2770 should be placed close to the battery cells with good thermal contact. it may be necessary to include thermally conductive putty between the cells and the ds2770 to enable efficient heat transfer.
additionally, enclosing the cells and the ds2770 in a casing allows the heat generated by the cells as they charge to be transferred to the ds2770 before it is lost to the ambient conditions.
X射线检查技术在PCB组装中起着什么样的作用
Fairchild 为小型企业提供焕然一新的设计支持平台
28KHZ-40KHZ自动追频超声波电路板线路
点云标注在自动驾驶中的实时性要求
说一说半导体微型互联世界里的大变化
3节镍氢电池充电电路图
从2013年以来至今，全球约有40万名科学家在这些假期刊上发表论文
ZLG致远电子E6000率先支持新国标 电压暂降和短时中断的定义
【内含PDF】如何研发性能优异的储氢材料？高压储氢吸附仪在储氢材料中的应用
crc校验原理_怎样修复crc校验错误
Micro LED显示不断推陈出新 但还有很多问题丞待解决
日立推出全新自动盖章机器人 各方面都引起了强烈的争议
深度解读，如何根据ISO26262开发安全要求
华为禁令持续 美日芯片厂现况惨不忍睹
黄曲霉毒素检测的产品性能
无人机 | 系统如何实现自主性
华为mate 40 Pro怎么升级鸿蒙系统
安森美半导体携手3M改进车辆和道路基础设施之间的通信
新一代iPhone 8回归精美玻璃背板，销量低于预期，库克是失败了吗？
航空工业研发出的新一代支线涡浆客机新舟700项目已通过专家评审