Using the MAXQ3180 Analog Fron
using the maxq3180 analog front-end in a single-phase configuration
abstract: this application note describes how to adapt the max3180 multifunction, polyphase analog front-end (afe) to measure single-phase power. the unique electrical configuration required to configure a max3180-based system for this application is provided.
overviewthree-phase power is commonly delivered to large industrial users and to multifamily dwellings. with billing based on energy usage, the supplying utility must accurately measure all three phases to charge the user the proper fee. there are many applications, most often single-family homes and smaller businesses, that use only a single phase. single-phase measurement is also required to measure the power consumed at the point of use by most appliances such as refrigerators and computers.
the maxq3180 is a dedicated electricity measurement front-end device. it collects and calculates polyphase voltage, current, power, energy, and many other metering and power-quality parameters of a polyphase load. the computed results can be retrieved by an external master through the on-chip spi™ bus.
although the maxq3180 was designed to perform measurements across three supply phases, it can also measure single-phase energy by using only phase a inputs and leaving the b and c channels disconnected. the remainder of this application note describes the simple procedure to implement this single-phase operation.
hardware configurationto configure the device inputs for single-phase operation, the following changes must be made: short the v1p, v2p, vn, and vcomm pins together. short the i1p and i1n pins together. short the i2p and i2n pins together. software configurationusing the maxq3180 in single-phase measurement mode requires no special software configuration. simply ignore registers and settings relating to the b and c voltages.
specifically, these registers include: all phase b calibration and status registers
all phase c calibration and status registers
all phase b measurement registers
all phase c measurement registers
all virtual registers ending in .b or .c if phase b and phase c are not required, device performance can be improved by disabling the scan functions associated with a those phases. setting bit 3 of the following registers will disable the corresponding scan function: scan_ib
scan_vb
scan_ic
scan_vc typical application drawingbelow is a typical application drawing for implementing the maxq3180 in a single-phase system.
conclusionthe maxq3180 multifunction, polyphase afe can make single-phase measurements. the device requires only a simple connection to the line and load to allow this operation. this configuration can also improve device performance, as the unused channels can have their scan functions disabled which reduces the amount of calculations that must be performed in a cycle.
续航重要还是安全重要，刀片电池给出了完美答案
绿色机器人在可持续发展中的各种应用介绍
英特尔要拿什么来追赶台积电？
AI CMOS 内置的芯片加强了隐私和数据安全的问题
INTER•FIT智能健身室 苏宁易购 苏宁小店 O2O
Using the MAXQ3180 Analog Fron
Flipkart向印度城市投放分拣机器人
喇叭120磁跟100磁的区别
小米MIUI9、华为EMUI5.1对比评测：最快MIUI9与不卡顿EMUI5.1，你觉得哪个好用？
针对不同目标应用和环境要求的数字电视接收技术
直播卖房的双重魔力，未来直播卖房将会如何发展
简单充电电路
iPhone13系列哪一款更值得入手
医学信号采集处理系统的软件技术性能
前端工程师与后端工程师有什么区别
中国5G的发展将直接带动经济总产出10.6万亿元
jvm内存区域由哪几部分组成
怎样使用瞬态轻触开关来打开或关闭大的高压大电流设备
D/A转换器的概念 D/A转换器的使用范围
万元程序员本本选购
abstract: this application note describes how to adapt the max3180 multifunction, polyphase analog front-end (afe) to measure single-phase power. the unique electrical configuration required to configure a max3180-based system for this application is provided.
overviewthree-phase power is commonly delivered to large industrial users and to multifamily dwellings. with billing based on energy usage, the supplying utility must accurately measure all three phases to charge the user the proper fee. there are many applications, most often single-family homes and smaller businesses, that use only a single phase. single-phase measurement is also required to measure the power consumed at the point of use by most appliances such as refrigerators and computers.
the maxq3180 is a dedicated electricity measurement front-end device. it collects and calculates polyphase voltage, current, power, energy, and many other metering and power-quality parameters of a polyphase load. the computed results can be retrieved by an external master through the on-chip spi™ bus.
although the maxq3180 was designed to perform measurements across three supply phases, it can also measure single-phase energy by using only phase a inputs and leaving the b and c channels disconnected. the remainder of this application note describes the simple procedure to implement this single-phase operation.
hardware configurationto configure the device inputs for single-phase operation, the following changes must be made: short the v1p, v2p, vn, and vcomm pins together. short the i1p and i1n pins together. short the i2p and i2n pins together. software configurationusing the maxq3180 in single-phase measurement mode requires no special software configuration. simply ignore registers and settings relating to the b and c voltages.
specifically, these registers include: all phase b calibration and status registers
all phase c calibration and status registers
all phase b measurement registers
all phase c measurement registers
all virtual registers ending in .b or .c if phase b and phase c are not required, device performance can be improved by disabling the scan functions associated with a those phases. setting bit 3 of the following registers will disable the corresponding scan function: scan_ib
scan_vb
scan_ic
scan_vc typical application drawingbelow is a typical application drawing for implementing the maxq3180 in a single-phase system.
conclusionthe maxq3180 multifunction, polyphase afe can make single-phase measurements. the device requires only a simple connection to the line and load to allow this operation. this configuration can also improve device performance, as the unused channels can have their scan functions disabled which reduces the amount of calculations that must be performed in a cycle.
续航重要还是安全重要，刀片电池给出了完美答案
绿色机器人在可持续发展中的各种应用介绍
英特尔要拿什么来追赶台积电？
AI CMOS 内置的芯片加强了隐私和数据安全的问题
INTER•FIT智能健身室 苏宁易购 苏宁小店 O2O
Using the MAXQ3180 Analog Fron
Flipkart向印度城市投放分拣机器人
喇叭120磁跟100磁的区别
小米MIUI9、华为EMUI5.1对比评测：最快MIUI9与不卡顿EMUI5.1，你觉得哪个好用？
针对不同目标应用和环境要求的数字电视接收技术
直播卖房的双重魔力，未来直播卖房将会如何发展
简单充电电路
iPhone13系列哪一款更值得入手
医学信号采集处理系统的软件技术性能
前端工程师与后端工程师有什么区别
中国5G的发展将直接带动经济总产出10.6万亿元
jvm内存区域由哪几部分组成
怎样使用瞬态轻触开关来打开或关闭大的高压大电流设备
D/A转换器的概念 D/A转换器的使用范围
万元程序员本本选购