使用DS4402/DS4404差额的输出电压DC-DC转换器
abstract: a ds4402 or ds4404 adjustable-current dac is used to adjust the margin of a dc-dc converter's output voltage. this article describes how to properly select the resistor values in a dc-dc converter's feedback divider network when a ds4402 or ds4404 is employed in the design.
the adjustable power supplythe ds4402/ds4404 dacs contain two/four i²c adjustable current sources capable of sinking and sourcing current. a typical application for these dacs is margining the output voltage of a dc-dc converter. (see figure 1.)
figure 1. dc-dc converter circuit with adjustable-current dacs used to margin the converter's output voltage.
the ds4402/ds4404 sink and source current from their out pins. valid full-scale current values range from 0.5ma to 2.0ma. the value of the full-scale current, ifs, is determined by the size of the resistor connected to the dac's fs pin of the corresponding out pin. the source/sink current generated by the ds4402/ds4404 is most commonly used to adjust the dc-dc converter's feedback voltage-divider.
determining the relationship between vout and ifschoosing the right ifs depends on how much margin is desired on the dc-dc converter's vout pin. to determine this margin, we must discover the relationship between vout and ifs.
summing currents into the vfb node, we find that:
where:
and:
however, since rb and vfb are constant, there is no change in irb. thus:
we are looking for the relationship between the margin on vout, δvout, and the selected range of ifs, δifs. since we know that the change in the ifs current equals the change in the current across ra, we subtract one set of vout and ira values from another to determine the relationship between vout and ifs.
first, solving equation 3 to find vout, we find that:
use equation 5 to create two equations. for one equation, we choose the maximum margin on vout, voutmax, and the maximum ira, iramax. for the other equation, we choose the nominal values for vout and ira, voutnom and iranom. subtracting the two equations, we get:
using equation 4, equation 6 translates into the relationship:
equation 7 shows that the relationship between the margin on vout and ifs is determined by the value of the resistor ra.
calculating the right resistor value for the margin on voutnow that we know the relationship between vout and ifs, we can select the correct value of ra and, thus, rb to generate the desired margin on vout. since the full-scale current sink/source range of the ds4402/ds4404 is 0.5ma to 2.0ma, we select 1ma as the ifs current for the dac. to set this value, choose rfs based on the following equation (equation 1 in the ds4402/ds4404 data sheet):
with vref = 1.23v, we solve equation 8 and find that rfs needs to be 9.53kω to produce a 1ma full-scale current.
with the ds4402/ds4404 ifs selected, we must determine the size of ra to achieve the desired margin on vout. a 2.0v vout with a 20% margin requires ±0.4v of change. sinking and sourcing settings of the ds4402/ds4404 will manage the sign. the change in ifs equals the ifs value of 1ma, and the desired change in vout is 0.4v. after substituting for δvout and δifs in equation 7, we solve for ra and get ra = 400ω.
determining the relationship between ra and rbthe feedback network of the circuit in figure 1 is a voltage-divider with resistors ra and rb. looking at figure 1 and assuming that ifs = 0a, we create a simple voltage-divider equation:
we assume that the desired nominal value for vout is 2.0v and that the dc-dc converter has a feedback voltage, vfb, of 0.8v. substituting the values for vout and vfb, the relationship between ra and rb is determined:
we use equation 10 to solve for rb, and get rb = 267ω.
conclusionthe resistive-feedback-divider network and the current-sinking/sourcing capabilities of the ds4402/ds4404 dacs control the margin of vout on a dc-dc converter. the relationship between the full-scale current, ifs, to the margin on vout is determined by the value of the resistor ra. by choosing the correct ifs value for your application, you can determine the correct resistor values for the feedback divider network, and achieve the desired margin on vout.
单片机入门之数码管时钟
TI 通用电量计选型指南
中国的创新之路该如何走？中美贸易战下中国能否承受？
详细解析农业物联网的3大系统、4大功能、5大应用案例
德索M12连接器的机械特性
使用DS4402/DS4404差额的输出电压DC-DC转换器
电机控制行业受重视，国内几家电机企业的新动态
三相电动机正反转控制
盘点2018年哪些工业机器人公司值得注意
双十一充电宝怎么选？2021性价比高的充电宝推荐
小米自主研发的松果处理器究竟如何？ 别抱太大希望
功率模块铜线键合工艺参数优化设计方案
沈阳联通联合华为成功打造出5G智慧机场
Mini LED行业「Plus」级别新选择
过压、欠压及过热保护电路
亚信科技正在从三个领域赋能5G商用成功
荣耀xSportPRO开启预约 将在本月开卖
MEMS激光雷达技术及其相比机械式激光雷达的优势！
如何正确选购扫地机器人之规划式机器人篇
晶振的10大应用原则是什么
the adjustable power supplythe ds4402/ds4404 dacs contain two/four i²c adjustable current sources capable of sinking and sourcing current. a typical application for these dacs is margining the output voltage of a dc-dc converter. (see figure 1.)
figure 1. dc-dc converter circuit with adjustable-current dacs used to margin the converter's output voltage.
the ds4402/ds4404 sink and source current from their out pins. valid full-scale current values range from 0.5ma to 2.0ma. the value of the full-scale current, ifs, is determined by the size of the resistor connected to the dac's fs pin of the corresponding out pin. the source/sink current generated by the ds4402/ds4404 is most commonly used to adjust the dc-dc converter's feedback voltage-divider.
determining the relationship between vout and ifschoosing the right ifs depends on how much margin is desired on the dc-dc converter's vout pin. to determine this margin, we must discover the relationship between vout and ifs.
summing currents into the vfb node, we find that:
where:
and:
however, since rb and vfb are constant, there is no change in irb. thus:
we are looking for the relationship between the margin on vout, δvout, and the selected range of ifs, δifs. since we know that the change in the ifs current equals the change in the current across ra, we subtract one set of vout and ira values from another to determine the relationship between vout and ifs.
first, solving equation 3 to find vout, we find that:
use equation 5 to create two equations. for one equation, we choose the maximum margin on vout, voutmax, and the maximum ira, iramax. for the other equation, we choose the nominal values for vout and ira, voutnom and iranom. subtracting the two equations, we get:
using equation 4, equation 6 translates into the relationship:
equation 7 shows that the relationship between the margin on vout and ifs is determined by the value of the resistor ra.
calculating the right resistor value for the margin on voutnow that we know the relationship between vout and ifs, we can select the correct value of ra and, thus, rb to generate the desired margin on vout. since the full-scale current sink/source range of the ds4402/ds4404 is 0.5ma to 2.0ma, we select 1ma as the ifs current for the dac. to set this value, choose rfs based on the following equation (equation 1 in the ds4402/ds4404 data sheet):
with vref = 1.23v, we solve equation 8 and find that rfs needs to be 9.53kω to produce a 1ma full-scale current.
with the ds4402/ds4404 ifs selected, we must determine the size of ra to achieve the desired margin on vout. a 2.0v vout with a 20% margin requires ±0.4v of change. sinking and sourcing settings of the ds4402/ds4404 will manage the sign. the change in ifs equals the ifs value of 1ma, and the desired change in vout is 0.4v. after substituting for δvout and δifs in equation 7, we solve for ra and get ra = 400ω.
determining the relationship between ra and rbthe feedback network of the circuit in figure 1 is a voltage-divider with resistors ra and rb. looking at figure 1 and assuming that ifs = 0a, we create a simple voltage-divider equation:
we assume that the desired nominal value for vout is 2.0v and that the dc-dc converter has a feedback voltage, vfb, of 0.8v. substituting the values for vout and vfb, the relationship between ra and rb is determined:
we use equation 10 to solve for rb, and get rb = 267ω.
conclusionthe resistive-feedback-divider network and the current-sinking/sourcing capabilities of the ds4402/ds4404 dacs control the margin of vout on a dc-dc converter. the relationship between the full-scale current, ifs, to the margin on vout is determined by the value of the resistor ra. by choosing the correct ifs value for your application, you can determine the correct resistor values for the feedback divider network, and achieve the desired margin on vout.
单片机入门之数码管时钟
TI 通用电量计选型指南
中国的创新之路该如何走？中美贸易战下中国能否承受？
详细解析农业物联网的3大系统、4大功能、5大应用案例
德索M12连接器的机械特性
使用DS4402/DS4404差额的输出电压DC-DC转换器
电机控制行业受重视，国内几家电机企业的新动态
三相电动机正反转控制
盘点2018年哪些工业机器人公司值得注意
双十一充电宝怎么选？2021性价比高的充电宝推荐
小米自主研发的松果处理器究竟如何？ 别抱太大希望
功率模块铜线键合工艺参数优化设计方案
沈阳联通联合华为成功打造出5G智慧机场
Mini LED行业「Plus」级别新选择
过压、欠压及过热保护电路
亚信科技正在从三个领域赋能5G商用成功
荣耀xSportPRO开启预约 将在本月开卖
MEMS激光雷达技术及其相比机械式激光雷达的优势！
如何正确选购扫地机器人之规划式机器人篇
晶振的10大应用原则是什么